IGCSE/GCSE/O & A Level/IB/University Student Forum

Qualification => Subject Doubts => IGCSE/ GCSE => Sciences => Topic started by: Bassiouni on May 25, 2010, 03:58:38 pm

Title: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 25, 2010, 03:58:38 pm

Physics Paper 1 And Paper 3 are Tommorrow and After tommorrow . Any idea what shall i do to get my self a good mark.

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: ahmed_eg on May 25, 2010, 04:26:29 pm

just revise from your textbook at first or if u studied before then skip this and just answer past papers
god be with u  ;)

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: nudi on May 25, 2010, 06:32:27 pm

Wat about paper 1??wat exactly should study..actually i was busy with other subjects..i studied..but i just wana for  do Quick revise do u know which ..lessons..i have to study more..for each papers??

DO u know which years are expected to come //same of Questions??

Guys iam really so scared from PHYSICS PLZZ HELP ME

THANK YOU>>>>
Good luck wid u alll

Iam egyption but taking it in KSA

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 25, 2010, 07:18:01 pm

Im Egyptian too, Yh paper 1 is tricky, has a high threshold for an A :S:S

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: rameeziiii on May 25, 2010, 08:25:41 pm

Quote from: nudi on May 25, 2010, 06:32:27 pm

Wat about paper 1??wat exactly should study..actually i was busy with other subjects..i studied..but i just wana for  do Quick revise do u know which ..lessons..i have to study more..for each papers??

DO u know which years are expected to come //same of Questions??

Guys iam really so scared from PHYSICS PLZZ HELP ME

THANK YOU>>>>
Good luck wid u alll

Iam egyption but taking it in KSA

are you appearing in riyadh? i'm appearing  there and  need help..

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: 5aroofa on May 25, 2010, 09:01:02 pm

I find that doing past papers helps a lot!  :)
Just do as many as you can and go over your mistakes and the parts you tend to struggle on (if any). 
Good luck ;D

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: nizzy on May 25, 2010, 09:42:05 pm

paper 1 always has repeated questions for past papers so study those alot :)

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: reyesbabyx on May 25, 2010, 10:23:36 pm

wooooooooo i'm doing it in riyadh too
manarat?!  ;D

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: nudi on May 25, 2010, 10:27:57 pm

Iam in Kobar..On hossan school...
i didn't do too much in paper 1::S:S:( iam suck on it:'(

pray for me plzzzzzzzz

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: rameeziiii on May 25, 2010, 11:35:34 pm

Quote from: reyesbabyx on May 25, 2010, 10:23:36 pm

wooooooooo i'm doing it in riyadh too
manarat?!  ;D

yes manarat

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Dana on May 26, 2010, 08:30:14 am

Quote from: nudi on May 25, 2010, 10:27:57 pm

Iam in Kobar..On hossan school...
i didn't do too much in paper 1::S:S:( iam suck on it:'(

pray for me plzzzzzzzz

What's your name? I'm in Hussan too :P Unfortunately. Do alot of older years, they repeat more from there. Also solve GCE o levels

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: aneeta on May 26, 2010, 10:25:28 am

Omg! im so freaked out about paper 3!! O.O
its like tomorowww!!!  but paper 1 went good... it wasnt that hard(: i just hope paper 3 is good!!

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 26, 2010, 11:25:53 am

Quote from: aneeta on May 26, 2010, 10:25:28 am

Omg! im so freaked out about paper 3!! O.O
its like tomorowww!!!  but paper 1 went good... it wasnt that hard(: i just hope paper 3 is good!!

Yh paper 1 was good, 3 is the one i fear -.-

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: aneeta on May 26, 2010, 04:22:31 pm

Quote from: Bassiouni on May 26, 2010, 11:25:53 am

Yh paper 1 was good, 3 is the one i fear -.-

Tell me about it!! im just doing pass papers at the moment, their okay.. but i wont be surprised if tomorrows paper is hard!!
Have you started pass paperS?? how is it going??

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 26, 2010, 04:52:10 pm

Quote from: aneeta on May 26, 2010, 04:22:31 pm

Tell me about it!! im just doing pass papers at the moment, their okay.. but i wont be surprised if tomorrows paper is hard!!
Have you started pass paperS?? how is it going??

Yh our teachers Made us Solve past papers since 2001 from beginnning of the year after each chapter, im gonna Print some exams for today and Answer them after i read my Notes :) I hope i do well and its not hard, Although its always an Advantage for a hard paper, Curve go Down down down :D:D hows it gpoin with you ?

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: aneeta on May 26, 2010, 05:14:56 pm

Quote from: Bassiouni on May 26, 2010, 04:52:10 pm

Yh our teachers Made us Solve past papers since 2001 from beginnning of the year after each chapter, im gonna Print some exams for today and Answer them after i read my Notes :) I hope i do well and its not hard, Although its always an Advantage for a hard paper, Curve go Down down down :D:D hows it gpoin with you ?

Oh okay thats great!..I had already read my notes so i was just doing passpapers... Yeah i hope i do well too.. :) your right its not that hard its pretty alright once you know the basics.. haha, its going good (: not bad!! but lets hope we rock tomorows paper  :P ;) lol
By the way do you do all sciences?? or some commerce subjects too??...

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 26, 2010, 05:27:13 pm

Quote from: aneeta on May 26, 2010, 05:14:56 pm

Oh okay thats great!..I had already read my notes so i was just doing passpapers... Yeah i hope i do well too.. :) your right its not that hard its pretty alright once you know the basics.. haha, its going good (: not bad!! but lets hope we rock tomorows paper  :P ;) lol
By the way do you do all sciences?? or some commerce subjects too??...

I did Chemistry , Maths Edexcel O.L, English ,ICT, Arabic Edexcel. Last year.

This is I took Maths AL (Edexcel) , Physics, Business, Accounting .

You ?

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: aneeta on May 26, 2010, 06:55:01 pm

Quote from: Bassiouni on May 26, 2010, 05:27:13 pm

I did Chemistry , Maths Edexcel O.L, English ,ICT, Arabic Edexcel. Last year.

This is I took Maths AL (Edexcel) , Physics, Business, Accounting .

You ?

Oh im doing all my subjects this year! I took all sciences Chemistry, Physics, Biology, Maths CIE O.L, English as a second language, and Environmental management!!

How did you do in the subjects you took last year??

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: dodi23 on May 26, 2010, 08:36:45 pm

ppl who r doin exams in manarate riyadh---lets meet tmmrw in physics p3!!!!

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 26, 2010, 09:19:00 pm

Quote from: aneeta on May 26, 2010, 06:55:01 pm

Oh im doing all my subjects this year! I took all sciences Chemistry, Physics, Biology, Maths CIE O.L, English as a second language, and Environmental management!!

How did you do in the subjects you took last year??

i got a Star and 4 A's

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: princess12 on May 26, 2010, 09:37:28 pm

good luck for physics paper 3

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 26, 2010, 11:03:16 pm

Quote from: princess12 on May 26, 2010, 09:37:28 pm

good luck for physics paper 3

Thanksssss :D

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: backstab on May 27, 2010, 02:14:29 am

12 hours to go paper 3 :(

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 27, 2010, 08:08:49 am

Yup :S

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: aneeta on May 27, 2010, 08:28:14 am

Quote from: Bassiouni on May 26, 2010, 09:19:00 pm

i got a Star and 4 A's

Omg you smart A**!! O.o

Title: Re: Physics Paper 1 and 3 Tommorrow and After.
Post by: Bassiouni on May 27, 2010, 09:45:09 am

Quote from: aneeta on May 27, 2010, 08:28:14 am

Omg you smart A**!! O.o

People say The Physics paper 3 was hard :S:S They say format changed :S

Title: notes to revise
Post by: Bleasthzzz on May 27, 2010, 10:13:14 am

General Physics
•   The density of an object only changes when the substance is heated or cooled.
•   Use a sinker if the object’s density is less than that of the liquid that it’s placed in.
•   When there is no air resistance the acceleration of any object is constant.
•   Easier to lift an object on the moon because gravity is less on the moon and there is no air resistance.
•   Resultant Force.
•   Gravitational, electrostatic and magnetic forces can be applied from a distance, other than that you have to be in contact with the object to apply a force.
•   A force applied on an object can cause a change in speed, direction or shape.
•   Acceleration is a vector.
•   When an object moves in a circle it is accelerating and at constant speed at the same time; because the direction is changing but the speed is constant.
•   Centripetal force is caused by tension in the string (ball on a string), gravity (satellite in space), friction between the tires and the road (a car on the road).
•   For an object to be in equilibrium the resultant force has equal zero (forces up = forces down) and the resultant moment has to equal zero (clockwise moment = anticlockwise moment).
•   For the stability of an object it has to have a wide base and a low center of mass.
•   To find the center of mass draw two points A and B, hang the object from each hole so that it can swing freely. Tie a weight to each point then draw the vertical line, the center of gravity is where the lines intersect.
•   When a car is going up a hill K.E. = Same, G.P.E = Increases, Chemical Energy (petrol) = Decreases and the total energy stays the same as energy is not lost, created or destroyed.
•   Internal energy = Thermal energy.
•   Fission = Power stations, Large molecules ? Small molecules.
•   Fusion = Sun, Small molecules ? Large molecules.
•   The mass lost is converted into heat energy.
•   In barometers the space at the top is a vacuum, because air would prevent the mercury from rising.
•   The width of the barometer does not affect the height of mercury.
•   Water manometers are more accurate to measure gas pressure.
•   To get the total pressure, remember to add the atmospheric pressure.
•   The gas pressure can be converted from mm of Hg to Pa by using P = ? g h, but remember to use the total pressure.
?
Thermal Physics
•   The pressure is the same on all the walls of the containers as the molecules move in a random motion.
•   ? Temperature = ? K.E. + Molecules hit the walls harder and more often.
•   Brownian motion: The tiny, fast-moving air molecules, which are in a constant random motion, are hitting the larger smoke particles from all directions.
•   Evaporation: The wind blows away any fast-moving molecules that have escaped from the water surface leaving more room for the next molecules to escape.
•   ? Surface area = The number of surface particles ? so more molecules escape.
•   Evaporation occurs at surface of liquid: no bubbles.
•   Boiling occurs within liquid: bubbles appear.
•   We feel cold because the molecules with the most kinetic energy escape from the surface and so the average kinetic energy of the remaining molecules ? and the temperature ?.
•   Thermal expansion: molecules gain kinetic energy and force each other further apart.
•   ? Volume = less area so the particles hit the walls harder and more often.
•   Mercury is used to measure high temperature.
•   Alcohol is used to measure low temperatures.
•   The capillary tube of a thermometer is narrow so a small change in temperature results in a large change in volume of the liquid.
•   Thermocouples have a low specific heat capacity this means they can measure rapidly changing temperatures and they don’t take much heat away from the object they are measuring the temperature of.
•   During melting or boiling the temperature stops rising because extra energy is needed, which is taken from the heat source, to overcome the strong forces of attraction which are holding the molecules together. This energy will not increase the speed of the molecules it will only break the bonds.
•   In an experiment the value for the latent heat of fusion is too low as energy is taken in from the surroundings which melt the ice.
•   In an experiment the latent heat of vaporisation is too high as energy is lost to the air from the heater therefore not all the energy is used for evaporating the water.
•   The value for the latent heat of vaporisation is much higher than the value for fusion because a large amount of energy is needed to break the bonds between the molecules to move them far apart.





Waves, Light & Sound
•   Waves transfer energy from one place to another.
•   The larger the frequency and amplitude the greater the energy of the wave.
•   When a wave gets refracted, its Speed ?, Wavelength ?, Frequency = Same.
•   When a wave gets reflected, its Speed = Same, Wavelength = Same, Frequency = Same.
•   When a wave gets diffracted, its Speed = Same, Wavelength = Same, Frequency = Same.
•   Radio waves are easily diffracted because they have a large wavelength.
•   In the spectrum of light all the colors have the same speed, but different wavelengths & frequencies.
•   Objects that produce light are called luminous objects.
•   When a light wave travels from a less dense material ? more dense material, the refractive index is more than 1.
•   When a light wave travels from a more dense material ? less dense material, the refractive index is less than 1.
•   A fish in a pond appears to be higher than it actually is because light refracts.
•   The centre of a lens is called its optical centre, C.
•   The line through C at right angles to the lens is called the principle axis.
•   The fatter the lens, the stronger it is and the shorter its focal length.
•   Parallel light, e.g. Sun, must be used to find the focal length of a lens.
•   When the object is at 2F the image is at 2F, real, inverted and same size as the object.
•   Dispersion of white light occurs because each fraction of white light has a different wavelength, so they are slowed down by different amounts.
•   A ripple tank is used to represent transverse waves.
•   A spring is used to represent longitudinal waves.
The speed of sound in:
Air   330 m/s
Water   1400 m/s
Wood   4000 m/s
•   Sound waves consist of a train of compressions and rarefactions in the air.
•   When a loudspeaker moves out the air is compressed, when it moves in the air is rarefied.
•   Frequency = number of vibrations per second.
•   The speed of sound increases as the particles move closer together.
•   Gamma Rays, X-Rays, Ultra-Violet are Carcinogenic.
Wave   Use
Gamma Rays   Sterilize food &equipment, Treat Cancer
X-Rays   Go through body to check for broken bones
Ultra-Violet   Suntan, Make fluorescent materials glow
Light   Allows you to see
Infrared   Heating, Remote Control, Mobile phones, Night sight
Microwaves   Send messages, Cook food
Radio & T.V.   Send messages


 





Electricity & Magnetism
•   Ferrous (magnetic) metals are Iron, Steel, Nickel & Cobalt.
•   The true test for a magnet is that it repels another magnet.
•   When a ferrous metal is magnetized the domains are turned so that they are lined up.
•   Making Magnets: Stroking, Electrically (D.C.).
•   Demagnetising a magnet: Heating, Hammering, Electrically (A.C.).
•    Uses of permanent magnets: Compasses, Door catches.
•   Uses of electromagnets: Scrap yards, Electric bell, Electric relay.
•   Conductors have free moving electrons in them, insulators don’t.
•   In electrostatic experiments metals cannot be used as they are good conductors of electricity and don’t stay charged.
•   In ammeters and voltmeters Red terminal = Positive, Black terminal = Negative.
•   When the resistors are connected in parallel the total resistance is always less than the smallest resistor.
•   Advantages of parallel circuits: each appliance can be switched on and off independently, if on appliance “blows”, the rest is unaffected, appliances in parallel gain the full voltage of the battery (e.g. lamps are brighter).
•   Voltmeters must have a high resistance so that the current doesn’t flow down the voltmeter; instead the current continues to flow around the circuit.
•   In a voltage/current graph the gradient = resistance, therefore the resistance of the conductor is constant as the gradient is constant.
•   Diode is a device which only allows voltage to flow one way.
•   It’s used for changing A.C. ? D.C.
•   Temperature ? = Resistance ?
•   Voltage ? = Resistance ?
•   Appliances that use a large current must have thick cables to avoid overheating.
•   In a short circuit the wires become very hot and the battery quickly drains.
•   Three pin plugs: Earth = Yellow/Green stripes, Live = Brown, Neutral = Blue.
•   Electricity enters via the live wire and returns via the neutral.
•   The earth wire protects the user from getting an electrical shock, it’s connected to the metal casing of the appliance.
•   Fuses are connected to the live wire, so if the current is too high, the fuse melts before the current reaches the appliance. Switches are also connected to the live wire.
•   Circuit breakers contain an electromagnet which, when the current exceeds the rated value of the circuit breaker, becomes powerful enough to pull a pair of contacts apart and break the circuit.
•   Advantages of circuit breakers: Much faster than fuses, Can be reset by pressing a button.
•   Reversing the current of a wire reverses the direction of the magnetic field.
•   To make a magnetic field stronger: ? Current, ? Number of turns on the coil.
•   Motors: When a wire carrying a current is placed at 90o between the poles of the magnet the wire experiences a force.
•   Fleming’s left hand rule: Thumb = Direction of Movement, First Finger = Direction of Field, Second Finger = Direction of Current in a wire.
•   The split ring reverses the current every half turn so the coil keeps turning the same way.
•   To change the direction of spin: Change the polarity of the magnets, change the direction of the current.
•   To make the motor spin faster: wind the coil around more times, ? the current through the coil, stronger magnets.
•   Generators: When coil cuts a magnetic field a voltage (current) is induced.
•   To increase the voltage (current) induced: Move the magnet faster, Use a stronger magnet, Put more turns on the coil.
•   Maximum current is induced when the coil is at 90o to the magnetic field. When it’s parallel there’s no cutting, hence no current.
•   When an alternating current is passed through the primary coil a changing magnetic field is set up in the soft iron core, which is cut by the secondary coil. Hence, an E.M.F. is induced in the secondary coil.
•   The soft iron core helps to concentrate the magnetic field through the coils.
•   A step-up transformer is used near power stations to increase the voltage and to decrease current so there’s no overheating and energy loss is reduced.
•   Transformers don’t work with D.C. because the current is not changing so there’s no cutting.
•   The soft iron core helps to concentrate the magnetic field through the coils.
•   Thermionic Emission occurs when electrons at the surface of the cathode are given enough energy to escape.
•   Y and X –Shift Knobs move the display vertically and horizontally.
•   The fluorescent screen transfers Kinetic Energy ? Light Energy.
•   Y-Gain Knob sets the scale for the C.R.O.
•   Voltage (current) is connected to the Y-Plates.
•   Time Base is connected to the X-Plates.
•   When using a voltage divider we must connect up terminals A,B and C.
•   As the slider moves towards B the voltage decreases, as it moves towards A the voltage increases.
•   In Reed switches & relays all the contacts are in a glass tube.
•   A Reed switch is operated by a magnet.
•   A Reed relay is operated by a coil which produces a magnetic field.
•   LDR: Light ?the resistance.
•   Thermistor:  ? Temperature = ?Resistance.
•   Capacitors are used for storing charge, they are used in time delay circuits (e.g. burglar alarm).
•   Advantages of a transistor: Fast, Cheap, Doesn’t wear out; because it has no moving parts.
•   Logic gates are made from transistors.




Atomic Physics
•   The mass of an electron is 1/1840 A.M.U.
•   We can write the nucleon and proton numbers of an element in a shorthand form called nuclide notation.
•   An atom is nearly empty space apart from a tiny, heavy (dense), positive nucleus.
•   Background radiation varies slightly as the radioactivity is random.
Name   Alpha (?)   Beta (?)   Gamma (?)
Nature & Source   2 neutrons + 2 protons
From Nucleus   A fast moving electron
Neutron in nucleus splits up to produce an electron and a proton.   Electromagnetic wave
Extra energy released from nucleus. Usually following ? or ? decays.
Charge   +2   -1   0
Mass   4 A.M.U.   1/1840 A.M.U.   0
Speed   10% speed of light   50% speed of light   Speed of light
Absorption   Stopped by a piece of paper, few cm of air   Stopped by a few mm of aluminium   Reduced, but not stopped, by lead
Ability to ionise   Strongly   Weakly   Very Weakly
Deflection in electric fields   Small, towards negative   Large, towards positive   No deflection
Deflection in magnetic fields   Small, same as wire   Large, opposite direction of wire   No deflection
Range in air   About 6 cm of air   One meter or more   Very large
Detectors   Photographic Film
Cloud Chamber
Thin window G-M tube
Spark Counter   Photographic film
Cloud Chamber
G-M tube
   Photographic Film
Cloud Chamber
G-M tube

•   The spark counter: The Alpha source ionizes the air, the positive ions move towards the cathode and the negative ions move towards the anode, so a spark is produced. Only works with alpha as they are excellent in ionising.
•   Geiger-Muller tube: Works the same way as the spark counter but can detect all types of radiation. Thin Mica window so alpha radiation can pass through; a large potential difference is needed so that there is an anode and a cathode to attract the charges. To differentiate between types of radiation detected use absorbers.



Safety Precautions:
•   Keep all radioactive materials in sealed containers made of thick lead.
•   Keep as far away from radioactive source as possible and use tongs.
•   Waste radioactive products are either buried underground or under the sea.
•   Keep exposure time as short as possible.
•   Don’t eat or drink near a radioactive substance.
•   Label radioactive sources with radioactive sign.
•   Wear a radioactive badge: Hole to detect ?, Aluminium to detect ?, Lead to detect ?.

•   Half life is not affected by temperature, pressure or chemical reactions.

Use   Type   Half-Life
Detect cracks in underground pipes   ? – Gas   Short
Measure thickness of paper   ?   Long, to keep activity constant
Sterilizing equipment in hospitals   ?   Short
Smoke Detectors   ?   Long, to keep activity constant and detectors will last longer

Smoke Detectors:
Alpha radiation ionizes the air, therefore a sensor detects radiation. Smoke reduces radiation and the sensor turns the alarm on.